www.cynergy3.com ? 2017 cynergy3 components, all rights reserved. specifications are subject to change without prior notice. cynergy3 components and the cynergy3 components logo are trademarks of cynergy3 components limited. iso 9001 certified cynergy3 components ltd. 7 cobham road ferndown industrial estate wimborne, dorset 21 7 bh pe SC-ISOSLICE-9 2017 telephone +44 (0) 1202 897969 email:sales@cynergy3.com made in the uk SC-ISOSLICE-9 isolated bus i/o module 4 off ac current inputs multiple inputs in one module very high accuracy, low cost communicates to ethernet / rs232 or rs485 network via an sc-e-100 unit input/output/power supply isolation automatic bus & power connection via din rail bus connector the SC-ISOSLICE-9 isolated bus i/o module combines full three-port isolation with access to an industrial bus. this bus connects to the sc-e-100 modules which are then used to transmit the process values via either an ethernet or a rs232/485 wired communications network. full 3-port isolation is standard. the SC-ISOSLICE-9 is designed to accept current inputs from current transformers with current outputs. non-interactive zero and span controls make adjustment and calibration of the unit quick and simple. the units have a wide ranging 12 to 36 vdc. this supply can either be wired to the appropriate terminals or picked up automatically from the bus connector. input types for SC-ISOSLICE-9 ac current ac current ranges 0-1aac min & max full scale ranges are: outputs for output modules see sc-isoslice-6 or sc-isoslice-8 technical specifications parameter min typ max comments supply voltage 12v 24v 36vdc supply current (ma) 45 90 for 24vdc supply (260ma for 50ms on start-up) bus connection 16-bit bus connection volt drop 0.3 at 5a ac input input impedance (a) 0.2 dependant on range (typ=0-1a) temp coefficient 50ppm/oc time constant (10-90%) 200ms operating ambient 0oc 55oc relative humidity 0% 90% isolation voltage 1kv see note surge voltage 2.5kv for 50s transient of 10kv/s notes absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. device is protected against reverse polarity connection. accuracy figures based on 24vdc supply, 4-20ma output with 250 load and an ambient 20oc. installation data mounting din rail ts35 orientation any connections screw clamp with pressure plate conductor size 0.5-4.0mm insulation stripping 12mm weight approx 95g ordering information part no.: SC-ISOSLICE-9 part number universal inputs ma or v inputs rtd inputs t/c inputs analogue outputs digital inputs digital outputs sc-isoslice-1 2 sc-isoslice-2 8 sc-isoslice-3 4 sc-isoslice-4 4 sc-isoslice-5 8 sc-isoslice-6 4 sc-isoslice-7 2xfreqin sc-isoslice-8 4 SC-ISOSLICE-9 4 x ac i/v dc current 0-100ma 0 ? 1a ac current 0-100ma 0 - 1a
|
